<< A >> Front Camshaft Bearing Cap/Oil Feeding Camshaft Bearing Cap/Camshaft Bearing Cap/Thrust Camshaft Bearing Cap Removal
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Loosing the camshaft bearing cap installation bolts in four to five steps. Do not loosen bolts in one step as this causes the valve spring force to push on the bolts and make them jump out causing damage to the threads.
First remove a mounting bolt of the front camshaft bearing cap and then a mounting bolt of each camshaft bearing cap in the order shown in the illustration.