Valve Tappet
WARNING: This page is about a different variant/trim than selected.
- Measure the valve tappet at the illustrated position. If the measured value is not in agreement with the value in the table corresponding to the identification mark, replace the valve tappet.
- The valve tappet has an identification mark and stamping of thickness at illustrated positions.
There are 47 kinds of valve tappets at intervals of 0.015 mm (0.0006 inch) in the range between 3.000 mm (0.1181 inch) and 3.690 mm (0.1453 inch).
| Thickness mm (in) | Thickness stamp |
|---|---|
| 3.000 (0.1181) | 3.000 |
| 3.015 (0.1187) | 3.015 |
| 3.030 (0.1193) | 3.030 |
| 3.045 (0.1199) | 3.045 |
| 3.060 (0.1205) | 3.060 |
| 3.075 (0.1211) | 3.075 |
| 3.090 (0.1217) | 3.090 |
| 3.105 (0.1222) | 3.105 |
| 3.120 (0.1228) | 3.120 |
| 3.135 (0.1234) | 3.135 |
| 3.150 (0.1240) | 3.150 |
| 3.165 (0.1246) | 3.165 |
| 3.180 (0.1252) | 3.180 |
| 3.195 (0.1258) | 3.195 |
| 3.210 (0.1264) | 3.210 |
| 3.225 (0.1270) | 3.225 |
| 3.240 (0.1276) | 3.240 |
| 3.255 (0.1281) | 3.255 |
| 3.270 (0.1287) | 3.270 |
| 3.285 (0.1293) | 3.285 |
| 3.300 (0.1299) | 3.300 |
| 3.315 (0.1305) | 3.315 |
| 3.330 (0.1311) | 3.330 |
| 3.345 (0.1317) | 3.345 |
| 3.360 (0.1323) | 3.360 |
| 3.375 (0.1329) | 3.375 |
| 3.390 (0.1335) | 3.390 |
| 3.405 (0.1341) | 3.405 |
| 3.420 (0.1346) | 3.420 |
| 3.435 (0.1352) | 3.435 |
| 3.450 (0.1358) | 3.450 |
| 3.465 (0.1364) | 3.465 |
| 3.480 (0.1370) | 3.480 |
| 3.495 (0.1376) | 3.495 |
| 3.510 (0.1382) | 3.510 |
| 3.525 (0.1388) | 3.525 |
| 3.540 (0.1394) | 3.540 |
| 3.555 (0.1400) | 3.555 |
| 3.570 (0.1406) | 3.570 |
| 3.585 (0.1411) | 3.585 |
| 3.600 (0.1417) | 3.600 |
| 3.615 (0.1423) | 3.615 |
| 3.630 (0.1429) | 3.630 |
| 3.645 (0.1435) | 3.645 |
| 3.660 (0.1441) | 3.660 |
| 3.675 (0.1447) | 3.675 |
| 3.690 (0.1453) | 3.690 |