Section 3 (Engine Overhaul - 2.0L Turbo - Lancer): Camshaft: Inspection: Camshaft
WARNING: This page is about a different variant/trim than selected.
Measure camshaft height (camshaft major axis). If the height is less than the limit, replace the camshaft.
Standard value:
Intake: 44.1 mm (1.74 inches)
Exhaust: 45.0 mm (1.77 inches)
Limit:
Intake: 43.6 mm (1.72 inches)
Exhaust: 44.5 mm (1.75 inches)