LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Rear Axle - Lancer RALLIART, Se) >> Differential Carrier Assembly >> LSD Case Assembly Disassembly And Assembly >> Disassembly Service Point >> << A >> Screw Removal

<< A >> Screw Removal

WARNING: This page is about a different variant/trim than selected.
  1. Check out the alignment marks.
  2. Loosen uniformly, little by little the screws securing differential case A to B.
  3. Separate differential case B from differential case A and remove their components.
  4. Keep the removed spring plates, friction plates, and friction discs organized in order of removal and separated for right and left use.
    Fig 1: Removing Differential Case Screws
    G05904455Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals