Indicator Light Or Warning Light List

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

If the LDW system detects a fault after the LDW camera has been initialized and its image has been adjusted successfully, the multi-information display in the combination meter will provide a visual or audible warning.

Fig 1: Identifying LDW Indicator Light, Light LDW Warning Light, Message

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Item	Message	Light type	Contents
Intermittent malfunction detection	LDW SERVICE REQUIRED	LDW warning light	The following signals, which are received via CAN communication, are unfeasible. Engine control module: Vehicle speed signal ASC-ECU: Yaw rate signal Steering wheel sensor: Steering angular velocity signal ETACS-ECU: Stop light switch signal
Trouble detection	LDW SERVICE REQUIRED	LDW warning light	Refer to the fail-safe functions in "Diagnosis Function" . Refer to DIAGNOSIS FUNCTION .
Abnormal temperature detection	LDW NOT AVAILABLE	LDW warning light	The internal temperature in the LDW camera reaches 85 °C or more.
Operation permission status	-	LDW indicator light	A green indicator will illuminate when the operation is "permitted".
Warning monitor status	-	LDW indicator light	A green indicator will illuminate when the system has entered the warning monitor status.
Warning status	LANE DEPARTURE	LDW indicator light	An amber indicator will flash when the system has entered the warning status.
When the LDW camera image input compensation is executed, the LDW-ECU (rain sensor) is initialized or the LDW camera image focus adjustment is executed.	-	LDW indicator light	A green indicator flashes. For details, refer to HOW TO INITIALIZE THE LDW CAMERA and HOW TO ADJUST THE LDW CAMERA IMAGE .