DTC C1706: LDW CAMERA adjustment Not COMP: Diagnosis

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1. Check the camera mounted surface on the windshield.
Visually check the LDW camera mounted surface on the windshield for scratch, cracks, contamination or drain drops.

Q: Is the check result normal?
1. YES: Adjust the LDW camera image. (Refer to HOW TO ADJUST THE LDW CAMERA IMAGE ). Then go to Step 2.
2. NO: Windshield glass replacement (Refer to WINDSHIELD GLASS REMOVAL AND INSTALLATION .)
STEP 2. Recheck for diagnostic trouble code.
Check if the DTC No. C1706 is stored in LDW-ECU.
1. Turn the ignition switch from the LOCK (OFF) position to the ON position.
2. Check if the DTC is stored.
Q: Is the DTC stored?
1. YES: Replace the LDW-ECU.
2. NO: The trouble can be an intermittent malfunction (Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTION ).