DTC C1703: LDW CAMERA not Initialization: Diagnosis

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1. Check the camera mounted surface on the windshield.
Visually check the LDW camera mounted surface on the windshield for scratch, cracks, contamination or drain drops.

Q: Is the check result normal?
1. YES: Initialize the LDW camera. (Refer to HOW TO INITIALIZE THE LDW CAMERA ). Then go to Step 2.
2. NO: Windshield glass replacement (Refer to WINDSHIELD GLASS REMOVAL AND INSTALLATION .)
STEP 2. Recheck for diagnostic trouble code.
Check if the DTC No. C1703 is stored in LDW-ECU.
1. Turn the ignition switch from the LOCK (OFF) position to the ON position.
2. Check if the DTC is stored.
Q: Is the DTC stored?
1. YES: Replace the LDW-ECU.
2. NO: This diagnosis is complete.