Inspection Procedure 9: The auto light function does not work normally. < Vehicles with LDW >: Operation
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
The ETACS-ECU operates this function in accordance with the input signals from driving distance, LDW-ECU (light sensor), and column switch (auto light switch). Also, when the column switch (lighting switch) is in the "AUTO" position, and when an abnormality is present to the auto light circuit, the fail-safe function is activated and the low beam is turned ON at all times regardless of the brightness around the vehicle.