DATA LIST REFERENCE TABLE < Vehicles with lighting control sensor >
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
| Item No. | M.U.T.-III display | Condition | Normal condition |
|---|---|---|---|
| 7001 | RLS IG1 | When the ignition switch is turned to the LOCK or ACC position. | OFF |
| When the ignition switch is turned to the ON or START position. | ON | ||
| 7002 | RLS Light sensor sensitivity | When the customize value of the lighting control sensor sensitivity is set to level 1 (quick). | Level 1 bright |
| When the customize value of the lighting control sensor sensitivity is set to level 2 (slightly quick). | Level 2 bright | ||
| When the customize value of the lighting control sensor sensitivity is set to level 3 (normal). | Level 3 | ||
| When the customize value of the lighting control sensor sensitivity is set to level 4 (slightly slow). | Level 4 dark | ||
| When the customize value of the lighting control sensor sensitivity is set to level 5 (slow). | Level 5 dark | ||
| 7004 | RLS Radio ACC | When the ignition switch is turned to the LOCK or START position. | OFF |
| When the ignition switch is turned to the ACC or ON position. | ON | ||
| 7007 | RLS Vehicle speed | Perform a test run of the vehicle. | The values displayed on the speedometer and scan tool (M.U.T.-III) are almost the same. |
| 7009 | RLS Low beam "ON" request | When the area around the lighting control sensor is bright. | OFF |
| When the area around the lighting control sensor is dark. | ON | ||
| 7010 | RLS judgment illuminance output | When the area around the lighting control sensor has become bright from dark | The value displayed on the scan tool (M.U.T.-III) becomes large. |
| When the area around the lighting control sensor has become dark from bright. | The value displayed on the scan tool (M.U.T.-III) becomes small. | ||
| 7011 | RLS Tail light "ON" request | When the area around the lighting control sensor is bright. | OFF |
| When the area around the lighting control sensor is dark. | ON | ||
| 7012 | RLS Tunnel detect output | When the area around the lighting control sensor is bright. | OFF |
| When the area around the lighting control sensor is dark. | ON | ||
| 7014 | RLS Specification | - | EU |
| 7015 | RLS ECU Diagnostic version | - | - |
| 7016 | RLS ECU Hardware version | - | - |
| 7017 | RLS ECU Software version | - | - |
| 7018 | RLS ECU Part number | - | - |
| 7019 | RLS ECU Serial number | - | - |