LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Headlight System - With Diagnostics) >> Service Precautions < Vehicles With Discharge Headlight > >> Checking Procedure For Discharge Headlight Related Parts (Inspection Procedure When Reusing The Headlight Control Unit) >> Check Of Wiring Harness Between Headlight Control Unit And Bulb

Check Of Wiring Harness Between Headlight Control Unit And Bulb

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

If any of the check items below are found, replace the headlight control unit.

WARNING: If the wiring harness between the headlight control unit and the bulb is damaged, always replace it. Attempting to repair the wiring harness may cause a melted harness wire, or may result in a burn or death due to an electric shock by high voltage.
Items to be checked Why the headlight control unit should be replaced
Wiring harness shield damaged Abnormal noise may cause.
Damaged connector (chipped or cracked plastics, or deformed terminal) The damaged part(s) may cause poor connection or short circuit.
scientia non olet · About LEMON Manuals