Customization Function
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Using the ETACS system of scan tool (M.U.T.-III), the following functions can be programmed. The programmed information is held even when the battery is disconnected.
| Adjustment item (scan tool display) | Adjustment item | Adjusting content (scan tool display) | Adjusting content |
|---|---|---|---|
| Turn power source | Adjustment of turn-signal light operation condition | ACC or IG1 | Operable with ACC or ON position |
| IG1 | Operable with ON position (initial condition) | ||
| Comfort flasher | With/without comfort flasher function | Disable | No function |
| Enable | With function (initial condition) | ||
| Hazard answer back | Adjustment of the number of keyless hazard warning light answer back flashes | Lock: 1, Unlock: 2 | LOCK: Flashes once, UNLOCK: Flashes twice (initial condition) |
| Lock: 1, Unlock: 0 | LOCK: Flashes once, UNLOCK: No flash | ||
| Lock: 0, Unlock: 2 | LOCK: No flash, UNLOCK: Flash twice | ||
| Lock: 2, Unlock: 1 | LOCK: Flash twice, UNLOCK: Flash once | ||
| Lock: 2, Unlock: 0 | LOCK: Flash twice, UNLOCK: No flash | ||
| Lock: 0, Unlock: 1 | LOCK: No flash, UNLOCK: Flash once | ||
| Lock: 0, Unlock: 0 | No function | ||
| Sensitivity for auto light | Lighting control sensor sensitivity (illumination intensity) < vehicles with lighting control sensor or vehicles with LDW > | Level 1 bright | High-high ambient brightness |
| Level 2 bright | High ambient brightness | ||
| Level 3 | Standard ambient brightness (initial condition) | ||
| Level 4 dark | Low ambient brightness | ||
| Level 5 dark | Low-low ambient brightness | ||
| Headlight auto cut customize | Adjustment of headlight automatic shutdown function | Disable | No function |
| Enable (C-spec.) | With function (initial condition) | ||
| Comfort flasher switch time | Switch operation time to activate the comfort flasher function | Normal | 0.4 second (initial condition) |
| Long | 0.8 second | ||
| Coming home light | Disabling or enabling coming home light function | Disable | No function |
| 15 sec. | Headlight illuminates for 15 seconds. | ||
| 30 sec. | Headlight illuminates for 30 seconds. (initial condition) | ||
| 60 sec. | Headlight illuminates for 60 seconds. | ||
| 180 sec. | Headlight illuminates for 180 seconds. | ||
| Welcome light | Disabling or enabling welcome light function | Disable | No function |
| Small light | Taillight illuminates. (initial condition) | ||
| Head light | Headlight illuminates. |