>> A << Headlight Assembly Installation
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Tighten the mounting screw and bolts to the specified torque in the order shown.
Tightening torque:
Screw: 1.5 ± 0.3 N.m (13 ± 2 in-lb)
Bolt: 4.5 ± 1.5 N.m (40 ± 13 in-lb)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.