Diagnostic Trouble Code Table
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
During diagnosis, a diagnostic trouble code associated with other system may be stored when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are stored, erase them all.
DIAGNOSTIC TROUBLE CODE TABLE
| Diagnostic trouble code No. | Diagnostic item |
||
|---|---|---|---|
| B2480 | Electromagnetic clutch short |
||
| B2481 | Pulse sensor power supply short |
||
| B2482 | No detection of neutral SW |
||
| B2483 | No detection of full latch SW |
||
| B2484 | Right-side touch sensor open circuit |
||
| B2485 | Left-side touch sensor open circuit |
||
| B2488 | ECU internal error |
||
| U0141 | ETACS-ECU CAN time-out |
||
| U0155 | Meter CAN time-out |
||
| U0164 | A/C CAN time-out |
||
| U0168 | KOS CAN time-out |
||
| U0184 | AUDIO CAN time-out |
||
| U0245 | AND CAN time-out |
||
| U1000 | OSS CAN time-out(1) |
||
| U1190 | No receive fault defect signal |
||
| U1195 | Coding not completed |
||
|
|||