LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Liftgate - Vehicles With Power Liftgate - With Diagnostics) >> Diagnostic Trouble Code Procedures >> Trouble Symptom Chart

Trouble Symptom Chart

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: During diagnosis, a diagnostic trouble code associated with other system may be stored when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are stored, erase them all.
Trouble symptom Inspection procedure number Reference
POWER SUPPLY CIRCUIT SYSTEM ABNORMALITY OF POWER LIFTGATE CONTROL UNIT. A-1 Inspection Procedure A-1: Power supply circuit system abnormality of power liftgate control unit 
 
POWER LIFTGATE AUTOMATIC OPERATION AND EASY CLOSER SYSTEM DO NOT WORK NORMALLY. A-2 Inspection Procedure A-2: Power liftgate automatic operation and easy closer system do not work normally 
 
THE POWER LIFTGATE AUTOMATIC OPERATION DOES NOT WORK NORMALLY (BOTH THE OPEN OPERATION AND CLOSE OPERATION DO NOT WORK). A-3 Inspection Procedure A-3: The power liftgateower liftgate automatic operation does not work normally (both the open operation and close operation do not work) 
 
POWER LIFTGATE AUTOMATIC OPERATION (CLOSE) DOES NOT WORK NORMALLY. A-4 Inspection Procedure A-4: Power liftgate automatic operation (close) does not work normally 
 
POWER LIFTGATE AUTOMATIC OPERATION (OPEN) DOES NOT WORK NORMALLY. A-5 Inspection Procedure A-5: Power liftgate automatic operation (open) does not work normally 
 
POWER LIFTGATE AUTOMATIC OPERATION DOES NOT WORK NORMALLY BY THE OPERATION OF POWER LIFTGATE CLOSE SWITCH (ONLY THE CLOSE OF AUTOMATIC OPERATION). A-6 Inspection Procedure A-6: Power liftgate automatic operation does not work normally by the operation of power liftgate close switch (only the close of automatic operation) 
 
POWER LIFTGATE AUTOMATIC OPERATION DOES NOT WORK NORMALLY BY THE OPERATION OF KEYLESS OPERATION KEY (FOR BOTH OPEN AND CLOSE OPERATIONS). A-7 Inspection Procedure A-7: Power liftgate automatic operation does not work normally by the operation of keyless operation key (for both open and close operations) 
 
POWER LIFTGATE AUTOMATIC OPERATION DOES NOT WORK NORMALLY BY THE OPERATION OF LIFTGATE LOCK RELEASE HANDLE (ONLY THE OPEN OF AUTOMATIC OPERATION). A-8 Inspection Procedure A-8: Power liftgate automatic operation does not work normally by the operation of liftgate lock release handle (only the open of automatic operation) 
 
POWER LIFTGATE AUTOMATIC OPERATION DOES NOT WORK NORMALLY BY THE OPERATION OF POWER LIFTGATE SWITCH (FOR BOTH OPEN AND CLOSE OPERATIONS). A-9 Inspection Procedure A-9: Power liftgate automatic operation does not work normally by the operation of power liftgate switch. (Open/close operation is not performed.) 
 
EASY CLOSER SYSTEM AND POWER LIFTGATE AUTOMATIC OPERATION (OPEN) WORK WITH THE DOOR LOCKED. A-10 Inspection Procedure A-10: Easy closer system and power liftgate automatic operation (open) work with the door locked 
 
HAZARD WARNING LIGHTS DO NOT FLASH WHEN POWER LIFTGATE WORKS AUTOMATICALLY. A-11 Inspection Procedure A-11: Hazard warning lights do not flash when power liftgate works automatically 
 
ALARM DOES NOT SOUND NORMALLY WHEN POWER LIFTGATE WORKS AUTOMATICALLY. A-12 Inspection Procedure A-12: Alarm does not sound normally when power liftgate works automatically 
 
POWER LIFTGATE BECOMES AS DOOR-AJAR. A-13 Inspection Procedure A-13: Power liftgate becomes as door-ajar 
 
scientia non olet · About LEMON Manuals