DTC U0141: ETACS-ECU CAN Time-out: Notes
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- If the diagnostic trouble code No. U0141 is stored, be sure to diagnose the CAN bus line.
- When replacing the ECU, always check that the communication circuit is normal.
- When the ETACS-ECU of vehicles without KOS is replaced, the encrypted code of the ignition key needs to be registered to the ETACS-ECU. (If the encrypted code is not registered, the engine cannot be started. Register the encrypted code as described in Immobilizer System - HOW TO REGISTER KEY ID .)