TPMS Troubleshooting Strategy
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Use these steps to plan your diagnostic strategy. If you follow them thoroughly, you will be sure that you have exhausted most of the possible ways to find a TPMS fault.
- Gather information about the problem from the customer.
- Verify that the condition described by the customer exists.
- Check the vehicle for any TPMS DTC.
- If you cannot verify the condition and there are no TPMS DTCs, the malfunction is intermittent. Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTIONS .
- If there is a TPMS DTC, record the number of the DTC, then perform the TPMS diagnostic trouble code procedures for the DTC. Refer to TPMS WARNING LIGHT CHECK