Check Chart For Trouble Symptoms
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
| Trouble symptom |
Inspection procedure No. |
Reference |
| Communication with M.U.T.-III is not possible. |
Communication with engine control module is not possible. |
- |
SYMPTOM PROCEDURES
. < 2.4L ENGINE >
SYMPTOM PROCEDURES
. < 3.0L ENGINE > |
| WHEN THE BRAKE PEDAL IS DEPRESSED, CRUISE CONTROL IS NOT CANCELLED. |
1 |
Inspection Procedure 1: When the Brake Pedal is Depressed, Cruise Control is not Cancelled
|
| WHEN THE SELECTOR LEVER IS SET TO "N" POSITION, CRUISE CONTROL IS NOT CANCELLED. |
2 |
Inspection Procedure 2: When the Selector Lever is Set to "N" Position, Cruise Control is not Cancelled
|
| WHEN THE CANCEL SWITCH IS PRESSED, CRUISE CONTROL IS NOT CANCELLED. |
3 |
Inspection Procedure 3: When the CANCEL Switch is Pressed, Cruise Control is not Cancelled
|
| CRUISE CONTROL CANNOT BE SET (NO RESPONSE SET - SWITCH AND RES + SWITCH IS PRESSED). |
4 |
Inspection Procedure 4: Cruise Control cannot be Set (No Response SET - Switch and RES + Switch is Pressed)
|
| HUNTING (REPEATED ACCELERATION AND DECELERATION) OCCURS AT THE SET VEHICLE SPEED. |
5 |
Inspection Procedure 5: Hunting (Repeated Acceleration and Deceleration) Occurs at the Set Vehicle Speed
|
| WHEN THE CRUISE CONTROL ON/OFF SWITCH IS TURNED ON, THE CRUISE CONTROL INDICATOR LIGHT DOES NOT ILLUMINATE (HOWEVER, THE CRUISE CONTROL SYSTEM IS NORMAL). |
6 |
Inspection Procedure 6: When the Cruise Control ON/OFF Switch is Turned ON, the Cruise Control Indicator Light does not Illuminate < standard meter > or the Cruise Control Display Screen is not Displayed < high contrast meter > (However, the Cruise Control System is Normal) . |
| WHEN THE CRUISE CONTROL SWITCH IS OPERATED, THE SYSTEM IS NOT TURNED ON. |
7 |
Inspection Procedure 7: When The Cruise Control Switch is Operated, The System is not Turned ON
|