LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Combination Meter On-Vehicle Service - With Diagnostics) >> Tachometer Check >> Service Reminder Function Set >> How To Operate The Scan Tool (M.U.T.-III) >> 5. Optional Int Schedule Setting

5. Optional Int Schedule Setting

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If the current schedule is set to the "Optional INT" by executing "3. Periodic reminder schedule set," the "set value" cannot be input. Therefore, set it to the schedule other than the "Optional INT" once, and then execute "5. Optional INT schedule setting."

In addition to the existing schedule, the optional service reminder schedule can be set.

  1. On the "Service Reminder" screen, select "7 Optional INT schedule setting."
    NOTE: The screen indicates that the optional schedule (Nos. 12 and 13 in the data list) has not been set.
    Fig 1: Selecting 7 Optional INT Schedule Setting Screen
    G09666967Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Set the optional schedule (distance or month) of the "Set value."
    NOTE: Either input of distance or month can execute the setting.
  3. Press the "OK" button.
    Fig 2: Display - Set Value Screen
    G09666968Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. The optional schedule is set. The set schedule becomes effective by executing "3. Periodic reminder schedule set" and setting the schedule to "Optional INT."
    NOTE: The screen indicates that "2 month" has been added to the optional schedule (No. 13 in the data list). (The distance of No. 12 in the data list has not been set.)
    Fig 3: Selecting 5 Periodic Reminder Schedule Set
    G09666969Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.