LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Combination Meter On-Vehicle Service - With Diagnostics) >> Tachometer Check >> Fuel Level Sensor Check >> Fwd >> Nominal Resistance Of The Fuel Level Sensor

Nominal Resistance Of The Fuel Level Sensor

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel pump module (Refer to FUEL PUMP MODULE REPLACEMENT ).
  2. When float of the fuel level sensor is in stopper positions "F" and "E", ensure that resistance between the fuel level sensor terminal and ground terminal is within the standard value.
    STANDARD VALUE SPECIFICATION

    Float position Gauge resistance value (ohms)
    Stopper position "F" 13.0 ± 1.0
    Stopper position "E" 120.0 ± 1.0
  3. When the float is moved slowly between stopper positions "F" and "E", ensure that the resistance is smoothly changing.
    Fig 1: Checking Fuel Level Sensor (FWD)
    G09666951Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals