LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Overhaul - 3.0L) >> Timing Belt >> Removal And Installation >> Installation Service Points >> >> E << Auto-TENSIONER Installation

>> E << Auto-TENSIONER Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Always bleed the auto-tensioner of air before installing the auto-tensioner. (Refer to AIR BLEEDING METHOD )
Fig 1: Identifying Projection Of Rod Of Auto-Tensioner Within Standard Value
G09663785
scientia non olet · About LEMON Manuals