LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Overhaul - 3.0L) >> Timing Belt >> Removal And Installation >> Installation Service Points >> >> B << Crankshaft Sprocket Installation

>> B << Crankshaft Sprocket Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the hole in the crankshaft sprocket.
  2. Clean and degrease the mating surfaces of the crankshaft sprocket.
    NOTE: Degreasing is necessary to prevent decrease in friction on the mating surfaces.
  3. Install the crankshaft sprocket to the crankshaft.
    Fig 1: Identifying Grease Applying Area On Mating Surfaces Of Crankshaft Sprocket
    G09663779
scientia non olet · About LEMON Manuals