LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Overhaul - 3.0L) >> Rocker Cover And Camshaft >> Removal And Installation >> Installation Service Points >> >> G << Rocker Cover, Right/Rocker Cover, Left Installation

>> G << Rocker Cover, Right/Rocker Cover, Left Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Tighten the rocker cover to the specified torque in the sequence shown in the illustration.

Tightening torque: 8.3 ± 1.0 N.m (74 ± 8 in-lb) 

Fig 1: Identifying Rocker Cover Mounting Bolt Tightening Sequence
G09663830