LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Overhaul - 3.0L) >> Rocker Cover And Camshaft >> Removal And Installation >> Installation Service Points >> >> A << Camshaft, Right/Camshaft, Left Installation

>> A << Camshaft, Right/Camshaft, Left Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Use care to prevent confusion of the right and left bank camshafts.
  1. Apply engine oil to the camshaft journals and cams and then install the camshafts.
    NOTE: The left bank camshaft is identified by a slit 4 mm (0.16 inch) wide at the rear end of the camshaft.
  2. Install the cylinder head, placing the dowel pin of the camshaft upward.
    Fig 1: Identifying Camshaft (Right And Left)
    G09663822