LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Overhaul - 3.0L) >> Rocker Cover And Camshaft >> Inspection >> Camshaft

Rocker Cover And Camshaft: Inspection: Camshaft

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Measure the cam height. If it is below the limit, replace the camshaft.

Fig 1: Measuring Cam Height
G09663831
  Standard value Minimum limit
A: Intake low speed cam 37.28 mm (1.468 inches) 36.78 mm (1.448 inches)
B: Intake high speed cam 36.23 mm (1.426 inches) 35.73 mm (1.407 inches)
C: Exhaust cam 37.89 mm (1.492 inches) 37.39 mm (1.472 inches)
Fig 2: Locating Low Speed And High Cam
G09663832