<< B >> Piston Pin Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

The special tool MD998780 consists of the elements shown in the illustration.
When removing the piston pin, the special tool MB991659 is also used.

Fig 1: Identifying Special Tools MD998780
Insert Push rod, into the piston from the front mark side, then attach Guide D, to the push rod.
Place the piston and connecting rod assembly on Base, with the front mark facing up.
Use a press to remove the piston pin.
NOTE: Keep the disassembled pistons, piston pins and connecting rods per cylinder.

Fig 2: Removing Piston Pin Using Press