>> A << Intake Manifold Installation
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Tighten the nuts on the left bank to 6.5 ± 1.5 N.m (58 ± 13 in-lb).
- Tighten the nuts on the right bank to the specified torque.
Tightening torque: 22 ± 1 N.m (16 ± 1 ft-lb)
- Tighten the nuts on the left bank to the specified torque.
Tightening torque: 22 ± 1 N.m (16 ± 1 ft-lb)
- Tighten the nuts on the right bank and those on the left bank again in that order.
Tightening torque: 22 ± 1 N.m (16 ± 1 ft-lb)