LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Overhaul - 3.0L) >> Intake Manifold Plenum And Throttle Body Assembly >> Removal And Installation >> Installation Service Point >> >> C << Throttle Body Stay Installation

>> C << Throttle Body Stay Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. After temporarily tightening the throttle body stay with the installation bolts, check that the throttle body fastens securely to the cylinder head.
  2. Tighten the throttle body stay to the specified torque.

    Tightening torque: 23 ± 6 N.m (17 ± 4 ft-lb). 

    Fig 1: Identifying Throttle Body Stay
    G09663770
scientia non olet · About LEMON Manuals