>> D << Exhaust Manifold Bracket, Right Installation
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- After temporarily tightening the right exhaust manifold bracket with the installation bolts, check the exhaust manifold fastens securely to the cylinder block. Tighten the right exhaust manifold bracket to the specified tightening torque.
- Tighten the cylinder block side bolt to the specified tightening torque.
Tightening torque: 47 ± 11 N.m (35 ± 8 ft-lb)
- Tighten the exhaust manifold side bolt to the specified tightening torque.
Tightening torque: 41 ± 10 N.m (30 ± 7 ft-lb)