>> A << Valve Stem Seal Installation
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Install the valve spring seat to the valve guide.CAUTION:
- Valve stem seals for intake valves and for exhaust valves are different. Be sure to install the correct ones.
- Valve stem seal identification color.
Intake: GRAY
Exhaust: GRAY GREEN
CAUTION:- Always use the special tool to install the valve stem seal. Improperly installed valve stem seals may leak oil.
- Do not strike the valve stem seal strongly because it might be damaged.
- Using special tool MB992182, install a new stem seal to the valve guide.NOTE: After install, check the special tool does not stick to the valve spring sheet. Put the valve spring sheet in position.