LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Continuously Variable Transaxle (CVT) On-Vehicle Service - With Diagnostics) >> Transaxle Control >> Selector Lever Assembly Continuity Check >> Switch Check

Switch Check

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Item Selector lever position Terminal number Continuity
P position detect switch < Vehicles with KOS > P 4 - 6 No continuity
Other than above 4 - 6 Continuity
P position detect switch < Vehicles without KOS > P 5 - 6 No continuity
Other than above 5 - 6 Continuity
Ds position switch < Vehicles without paddle shift > Ds, L 8 - 9 Continuity
Other than above 8 - 9 No continuity
Fig 1: Identifying Selector Lever Assembly Connector Pins
G09664956Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.