LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Continuously Variable Transaxle (CVT) On-Vehicle Service - With Diagnostics) >> Diagnosis < S-AWC > >> Symptom Procedures >> INSPECTION PROCEDURE 1: Communication Between Scan Tool and AWC-ECU Cannot be Established >> Comments On Trouble Symptom

Comments On Trouble Symptom

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

If scan tool (M.U.T.-III) cannot communicate with the electronically controlled AWC system, the CAN bus lines may have a problem. If the electronically controller AWC system is not in operation (in case of no AWC operation), the AWC-ECU power supply circuit system or AWC-ECU may have a problem.

scientia non olet · About LEMON Manuals