LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Continuously Variable Transaxle (CVT) On-Vehicle Service - With Diagnostics) >> Diagnosis < S-AWC > >> Indicator Check >> When the S-AWC control mode is selected by operating the drive mode selector

When the S-AWC control mode is selected by operating the drive mode selector

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Whenever the drive mode selector is operated, either of "AWC ECO", "NORMAL", "SNOW", "LOCK" should be displayed continuously at the top and briefly at the center on the multi-information display.

Fig 1: Display - Multi-Information (Drive Mode Selector) Screen
G09664903Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.