Trouble Symptom Chart

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: During diagnosis, a diagnostic trouble code associated with other system may be stored when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are stored, erase them all.

Trouble symptom		Inspection procedure number	Reference
TCM CANNOT COMMUNICATE WITH SCAN TOOL (M.U.T.-III).		1	INSPECTION PROCEDURE 1: TCM cannot Communicate with Scan Tool (M.U.T.-III)
VEHICLE CREEPS IN THE "N" RANGE.		2	INSPECTION PROCEDURE 2: Vehicle Creeps in the N Range
SHOCK IS EXPERIENCED DURING "N" TO "D" AND/OR "N" TO "R" SHIFTING OPERATION.		3	INSPECTION PROCEDURE 3: Shock is Experienced During N to D and/or N to R Shifting Operation
POOR ACCELERATION OR INCOMPLETE SHIFTING OPERATION		4	INSPECTION PROCEDURE 4: Poor Acceleration or Incomplete Shifting Operation
GEARS CANNOT BE CHANGED WITH THE PADDLE SHIFT < VEHICLES WITH PADDLE SHIFT >		5	INSPECTION PROCEDURE 5: Gears cannot be Changed with the Paddle Shift. < Vehicles with paddle shift >
The fluid temperature warning lamp illuminates too frequently	CANADA	6	INSPECTION PROCEDURE 6: The Fluid Temperature Warning Lamp Illuminates too Frequently. < Canada >
	EXCEPT CANADA	7	INSPECTION PROCEDURE 7: The Fluid Temperature Warning Lamp Illuminates too Frequently. < Except Canada >