Descriptions Of Monitor Methods

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

The status with the primary pulley speed of 1,000 r/min or more and with the secondary pulley speed of 150 r/min or less continues for 5 seconds.
1 seconds after the vehicle speed computed by CVT has dropped abruptly from 20 km/h (12.4 mph) or more to 5 km/h (3.1 mph) or less
When the secondary pulley speed sensor is found abnormal by comparing the engine speed, primary pulley speed, and vehicle speed