LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Electronic Time & Alarm Control System (ETACS) - With Diagnostics) >> Data List Reference Table >> Input Signal Procedures >> Inspection Procedure 2: The ignition switch (IG1) signal is not received >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

If there is an error to the input signal (IG1) from the ignition switch < Vehicles without KOS > or OSS-ECU < Vehicles with one touch start system >, or if the IG relay in ETACS-ECU does not function normally, the ignition switch (IG1) signal is no longer output to the communication line.

scientia non olet · About LEMON Manuals