Connector: C-421
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
| Terminal No. | Terminal code | Check item | Check condition | Normal condition |
|---|---|---|---|---|
| 1 | STLD | Stoplight drive signal | The ACC or the FCM activates, and the stoplights illuminate. | Battery positive voltage |
| 2 | W.HI | Windshield wiper (HI) output | When windshield wipers are operating at high speed | |
| 3 | TAR1 | Position light/side maker light (RH) output | With position light/side maker light ON | |
| 4 | Not used | |||
| 5 | BUP4 | Power supply (fuse No. 18) | Ignition switch: ON | Battery positive voltage |
| 6 | STP | Stoplight switch power supply | Stoplight switch: ON | |
| 7 | W.LO | Windshield wiper (LO) output | When windshield wipers are operating at low speed | |
| 8 | TAL1 | Position/side maker light (LH) output | With position/side maker light ON | |
| 9 | BLP1 | Transmission range switch (R) input | Selector lever: R and ignition switch: ON | |
| 10 | Not used | |||