LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Electronic Time & Alarm Control System (ETACS) - With Diagnostics) >> Data List Reference Table >> Connector: C-420

Connector: C-420

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying C-420 Connector
G09667343Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Terminal No. Terminal code Check item Check condition Normal condition
1 - 2 Not used
3 PWMB Power supply (fusible link No. 1) Ignition switch: ON Battery positive voltage
4 - 5 Not used
6 DEF0 Defogger output Defogger switch: ON 1 V or less
7 Not used
8 HOSW Horn switch input Horn switch: ON 1 V or less
9 ST Ignition switch (START) input Ignition switch: START Battery positive voltage
10 SGND Ground Always 1 V or less
11 Not used
12 PWM Power supply (fusible link No. 20) Ignition switch: ON Battery positive voltage
13 ACC1 Power supply (fuse No. 22) Ignition switch: ACC