Connector: C-419
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
| Terminal No. | Terminal code | Check item | Check condition | Normal condition |
|---|---|---|---|---|
| 1 | IGN | Engine ECU (IG1) output | Ignition switch: ON | Battery positive voltage |
| 2 | WACC | Windshield wiper (ACC) output | Ignition switch: ACC | |
| 3 | BKLP | Input from stoplight switch | Stoplight switch: ON | 5 V |
| 4 | FOGY | Output to fog lights | Fog light switch: ON | 1 V or less |
| 5 | ST2 | Ignition switch (START) switch output | Ignition switch: START | Battery positive voltage |
| 6 | WASH | Output to windshield washer | When windshield washer is operating | |
| 7 | W.WA | Rear washer output | When rear washer is operating | |
| 8 | W.AS | Windshield wiper auto stop switch input | When windshield wipers are operating | |
| 9 | TR1 & TR2-1 | Front turn-signal light output | With front turn-signal light (RH) illuminated | |
| 10 | TL1 & TL2-1 | Front turn-signal light output | With front turn-signal light (LH) illuminated | |
| 11 | FP/R | Engine control module (fuel control) input | Engine: Started | 1 V or less |