< Air Bag Not Deployed Because Of Low-Speed Collision >
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Check the SRS air bag components and seat belt assembly according to the following procedures.
- Check the operation of seat belt. If the seat belt cannot be drawn out, replace the seat belt with a new one.
- Visually check the seat belt components (such as pre-tensioner, retractor and buckle) for a dent, breaks, deformation, fraying. If found, replace them with new one.
- For removal and installation of parts, refer to "SERVICING THE SRS AIR BAG/SEAT BELT WITH PRE-TENSIONER " .