Occupant Classification Sensor: Inspection
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
If a dent, crack, deformation or rust is detected, replace with a new front seat cushion cover and pad assembly.
NOTE:
For checking of the occupant classification sensor other than described below, refer to the
section concerning SRS diagnosis (Refer to DIAGNOSTIC TROUBLE CODE CHART < Occupant classification-ECU >
).
- Check the front seat cushion cover and pad assembly for damage (gouges and tears, etc.).
- Check the connector and harness for damage, and terminals for deformation.