LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Controller Area Network (Can) Diagnosis) >> Precautions On How To Repair The Can Bus Lines >> Precautions On How To Repair The Terminator Resistor

Precautions On How To Repair The Terminator Resistor

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

If one-side terminator resistor is broken, the CAN communication will continue although noise suppression is deteriorated. No diagnostic trouble code may be stored even if the terminator resistor was broken. If damage is found, replace the ECU which incorporates the defective terminator resistor.

CAN BUS LINE REPAIR HARNESS (PART NAME AND NUMBER)

Part name Part number
Twist pair cable MN151514
scientia non olet · About LEMON Manuals