INSPECTION PROCEDURE 2: Uneven Body Clearance: Diagnosis

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1. Check the clearance around the hood.
Q: Is the clearance around the hood even?

YES : Go to Step 2.

NO : Adjust the hood (Refer to ADJUSTMENT OF CLEARANCE AROUND HOOD ). Then go to Step 2.
STEP 2. Retest the system.
Q: Are the clearances between body panels even?

YES : The procedure is complete.

NO : Return to Step 1.