LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Body - Lancer Evolution) >> Hood >> On-Vehicle Service >> Adjustment Of Clearance Around Hood

Adjustment Of Clearance Around Hood

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the hood hinge mounting bolts but do not remove them. Move the hood hinge back/forth and left/right to align the hood level.
  2. After the adjustment, tighten the hood hinge mounting bolts to 12 ± 2 N.m (102 ± 22 in-lb).
    Fig 1: Identifying Hood Hinge Mounting Bolts
    G05394827Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals