Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS
| Item | Specification |
|---|---|
| Armature plate mounting bolt | 16 ± 1 N.m (12 ± 1 ft-lb) |
| Discharge flexible hose mounting bolt (compressor side) | 25 ± 4 N.m (18 ± 3 ft-lb) |
| Discharge flexible hose mounting nut (condenser side) | 4.9 ± 0.9 N.m (43 ± 8 in-lb) |
| Connection between the liquid pipe A and B | 13 ± 1 N.m (115 ± 9 in-lb) |
| Liquid pipe A mounting bolt (condenser side) | 4.9 ± 0.9 N.m (43 ± 8 in-lb) |
| Suction flexible hose mounting bolt (compressor side) | 25 ± 4 N.m (18 ± 3 ft-lb) |
| Suction flexible hose mounting nut (heater unit side) | 4.9 ± 0.9 N.m (43 ± 8 in-lb) |
| Front deck crossmember mounting bolt (left side) | 23 ± 6 N.m (17 ± 4 ft-lb) |
| Front deck crossmember mounting bolt (right side) | 20 ± 5 N.m (15 ± 3 ft-lb) |
| Front deck crossmember mounting bolt (front deck side) | 20 ± 5 N.m (15 ± 3 ft-lb) |