LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Heater, Air Conditioning And Ventilation - Lancer Evolution) >> Compressor Assembly And Tension Pulley >> Disassembly And Assembly >> Assembly Service Points >> >> D << Air Gap Adjustment

>> D << Air Gap Adjustment

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Check whether or not the air gap of the clutch is within the standard value.

Standard value: 0.3 - 0.5 mm (0.012 - 0.020 inch) 

NOTE: If there is a deviation of the air gap from the standard value, make the necessary adjustment by adjusting the number of shims.
Fig 1: Adjusting Clutch Air Gap
G05386108Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals