Customization Function
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
By operating the ETACS system or MMCS of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
CUSTOMIZATION FUNCTION CHART
| Adjustment item (scan tool display) | Adjustment item | Adjustment contents (scan tool display) | Adjusting contents |
|---|---|---|---|
| Panic alarm switch | With/without panic alarm function | Disable | Without function |
| Enable | With function (default) |