LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Chassis Electrical - Lancer Evolution (5 Of 5)) >> ETACS >> Special Tool >> Input Signal Procedures >> Inspection Procedure 2: ETACS-Ecu Does Not Receive Any Signal From The Ignition Switch (IG1) >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

If there is an error to the ignition switch (IG1) input signal, or the IG1 relay inside the ETACS-ECU does not operate, the ignition switch (IG1) signal is no longer output to the communication line.

scientia non olet · About LEMON Manuals