LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Chassis Electrical - Lancer Evolution (5 Of 5)) >> ETACS >> Special Tool >> Input Signal Procedures >> Inspection Procedure 11: ETACS-Ecu Does Not Receive Any Signal From The Column Switch Signal >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

The ETACS-ECU receives the column switch signal via the LIN communication. If there is an abnormality to column switch or LIN bus line, the lights and wiper/washer do not work normally.

scientia non olet · About LEMON Manuals