LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Chassis Electrical - Lancer Evolution (1 Of 5)) >> Ignition Switch >> On-Vehicle Service >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before removing the steering wheel assembly, refer to SERVICE PRECAUTIONS and DRIVER'S AIR BAG MODULE AND CLOCK SPRING < Vehicles with WCM >.
CAUTION: After the installation, perform a calibration for the ASC-ECU to learn the steering wheel sensor neutral point (Refer to STEERING WHEEL SENSOR CALIBRATION ) < Vehicles with WCM and ASC >.
Fig 1: Steering Wheel Assembly Replacement Components With Torque Specifications
G05396679Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.