Trouble Symptom Chart

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

TROUBLE SYMPTOM CHART

Trouble symptom			Inspection Procedure No.
Headlight and taillight	All the headlights (low-beam) do not illuminate.		INSPECTION PROCEDURE 1: ALL THE HEADLIGHTS (LOW-BEAM) DO NOT ILLUMINATE.
	All the headlights (high-beam) do not illuminate.		INSPECTION PROCEDURE 2: ALL THE HEADLIGHTS (HIGH-BEAM) DO NOT ILLUMINATE.
	The headlights illuminate at low-beam (high-beam does not illuminate) regardless of the lighting switch positions.		INSPECTION PROCEDURE 3: THE HEADLIGHTS ILLUMINATE AT LOW-BEAM (HIGH-BEAM DOES NOT ILLUMINATE) REGARDLESS OF THE LIGHTING SWITCH POSITIONS.
	Headlights do not illuminate when the passing switch is operated.		INSPECTION PROCEDURE 4: HEADLIGHTS DO NOT ILLUMINATE WHEN THE PASSING SWITCH IS OPERATED.
	One of the headlights does not illuminate.		INSPECTION PROCEDURE 5: ONE OF THE HEADLIGHTS DOES NOT ILLUMINATE.
	High-beam indicator light does not illuminate normally.		INSPECTION PROCEDURE 6: HIGH-BEAM INDICATOR LIGHT DOES NOT ILLUMINATE NORMALLY.
	The headlight automatic shutdown function does not work normally.		INSPECTION PROCEDURE 7: THE HEADLIGHT AUTOMATIC SHUTDOWN FUNCTION DOES NOT WORK NORMALLY.
	Daytime running light function does not work normally.	Halogen type headlight	INSPECTION PROCEDURE 8: DAYTIME RUNNING LIGHT FUNCTION DOES NOT WORK NORMALLY. < HALOGEN TYPE HEADLIGHT >
	Daytime running light function does not work normally.	Discharge type headlight	INSPECTION PROCEDURE 8: DAYTIME RUNNING LIGHT FUNCTION DOES NOT WORK NORMALLY. < DISCHARGE TYPE HEADLIGHT >
	Any of the tail lights, side marker lights or the license plate lights does not Illuminate.		INSPECTION PROCEDURE 9: ANY OF THE TAIL LIGHTS, THE POSITION LIGHTS OR THE LICENSE PLATE LIGHTS DOES NOT ILLUMINATE.
	The auto light function does not work normally.		INSPECTION PROCEDURE 10: THE AUTO LIGHT FUNCTION DOES NOT WORK NORMALLY.
Turn-signal light	All the turn-signal lights do not illuminate.		INSPECTION PROCEDURE 11: ALL THE TURN-SIGNAL LIGHTS DO NOT ILLUMINATE.
	The comfort flashing function does not work normally.		INSPECTION PROCEDURE 12: THE COMFORT FLASHING FUNCTION DOES NOT WORK NORMALLY.
	The turn-signal indicator lights do not illuminate.		INSPECTION PROCEDURE 13: THE TURN-SIGNAL INDICATOR LIGHT DO NOT ILLUMINATE.